Bonding Primer – Roofing Adhesive

Membrane Roofing / Fluid Applied Roofing / Roofing Adhesive – 07 56 00

1. Product Name PrimeLock™ Bonding Primer 2. Manufacturer Lexis Coatings 1025 Rose Creek Dr Ste 620 #138 Woodstock, GA 30189 Phone: 770-755-1820 Fax: 206-888-2438 URL: www.lexiscoatings.com 3. Product Description PrimeLock™ Bonding Primer is a roofing adhesive for SeamStitch® Roofing Fabric for various roof repair situations. It is also an excellent bonding primer for difficult to adhere substrates. Basic Uses Built Up Roofing (BUR), Concrete Roofs, Modified Bitumen, Single Ply Roofing (PVC, TPO). Advantages Tenacious adhesion to various surfaces. Excellent primer for aged single ply membranes. Seals asphaltic surfaces with little or no bleed through. Must be topcoated. Easy to use, non-toxic and VOC compliant water based coating.
	4. Technical Data See table on the following page. 5. Installation All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. PrimeLock™ Bonding Primer is ready to use. Thinning is not recommended. Containers should not be left open for extended periods of time. Follow our roof repair and roof restoration procedures and always perform a coating adhesion test before doing the entire roof. Spray: Airless Sprayer, 1gpm, 3,000 psi, .017. Brush: Good quality synthetic bristle brush Roller: Short nap roller Clean Up: Water	6. Availability & Cost PrimeLock™ Bonding Primer is available directly from Lexis Coatings and from authorized distributors. Contact Lexis Coatings for referral to a local Sales Representative or visit our website. Pricing information can be obtained from Lexis Sales Representatives. 7. Warranty This product is designed to be topcoated with our elastomeric coatings. A warranty is provided on the entire roof restoration system when installed by an authorized contractor. 8. Maintenance Periodic maintenance of Lexis Roof Restoration System ensures extended service life and maintains reflectivity. 9. Technical Services Contact Lexis Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available. 10. Filing Services Additional product information is available from Lexis Coatings.

!/images/logo.csi30.gif(CSI) This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.

PrimeLock™ Bonding Primer Technical Data

Caution: PrimeLock™ Bonding Primer is a water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Lexis Coatings must be completely dry before exposing to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.

Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer’s sole responsibilty shall be to replace that portion of any product that proved to be defective.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.