Butyl Rubber Coating

MSDS

MATERIAL SAFETY DATA SHEET

I. CHEMICAL PRODUCT AND COMPANY INFORMATION

PRODUCT IDENTIFICATION: EnergyGuard Butyl Elastomeric Coating; Packaging: buckets, drums, totes; Chemical Name: Butyl Elastomeric Roof Coating; CAS Number: Blend
COMPANY IDENTIFICATION: Lexis Coatings
1025 Rose Creek Dr
Ste 620 #138
Woodstock, GA 30189
770-755-1820
FOR EMERGENCIES: 1-877-454-0052

II. HAZARDS IDENTIFICATION

CAUTION: Prolonged or repeated contact may cause skin or eye irritation. May be harmful if swallowed. Protect from freezing.
HMIS Rating: Health: 2
Flammability: 1
Reactivity: 0
Personal Protection Index: S
EYE:: Contact may cause eye irritation.
SKIN:: Can cause moderate skin irritation.
INHALATION: Avoid breathing vapors or mists. Prolonged or excessive inhalation may cause respiratory tract irritation. May cause allergic respiratory reaction.
INGESTION: Harmful if swallowed. Can burn mouth, throat and stomach.
CHRONIC EFFECTS: Sensitized (allergic) individuals may show allergenic lung and/or skin reaction. After an individual is diagnosed as sensitive to isocyanates, no exposure should be permitted. Chronic effects of overexposure to xylene may include kidney or liver damage.
REPRODUCTIVE HAZARDS: Exposure to Xylene may damage developing fetus.
CARCINOGENICITY INFORMATION: No known cancer hazards.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Asthma-like conditions may cause additional breathing problem.

III. COMPOSITION AND INFORMATION ON INGREDIENTS

COMPONENT LISTING:

Chemical Name	Amount	CAS Number
VM & P Naptha	52 %	67472-89-8
Xylene	8%	1330-20-7

(See Section 8 for exposure guidelines.)

(See Section 15 for regulatory information.)

HAZARDS DISCLOSURE

This product contains hazardous materials that are subject to reporting under Section 313 of Title III: VM&P Naptha & Xylene.

As defined under Sara 311 and 312, this product contains materials that are fire hazards.

IV. FIRST AID MEASURES

EYE CONTACT: After initial flusing, remove any contact lenses and continue flushing for at least 15 minutes. Get medical attention if irritation develops or persists.
SKIN CONTACT: Remove contaminated clothing and shoes. Wash affected area immediately with large amounts of soap and water. Get medical attention if irritation develops or persists.
INHALATION: If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if cough or other symptoms develop.
INGESTION: Get immediate medical attention. Do not induce vomiting. Contact a physician. Never give anything by mouth to an unconscious person.

V. FIRE FIGHTING MEASURES

FLAMMABLE PROPERTIES: COC Flash Point: 68 F; Auto Ignition Temperature: N/A
FLAMMABLE LIMITS IN AIR: LEL: 1 %
EXTINGUISHING MEDIA: Carbon dioxide, foam or dry powder.
FIRE & EXPLOSION HAZARDS: Vapors may flow along surfaces to distant ignition sources and flash back. Closed containers exposed to heat may explode. Contact with strong oxidizers may cause fire.
FIRE FIGHTING INSTRUCTIONS: As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full protective gear.

VI. ACCIDENTAL RELEASE MEASURES

SAFEGUARDS (PERSONNEL):: Wear safety goggles. Wear appropriate protective equipment.
INITIAL CONTAINMENT:: Contain spilled material. Absorb spills with inert or absorbent material.
LARGE SPILLS PROCEDURE:: Ventilate enclosed areas or wear self-contained breathing appratus. Recover free liquid in closed containers. Keep out of sewers and water courses. Clean area with absorbent material.

VII. HANDLING AND STORAGE

RECOMMENDED STORAGE TEMPERATURE:: Minimum: 15.6 C (60.1 F)
Maximum: 26.7 C (80.1 F)
SHELF LIFE (in original, sealed containers):: 6 months @ 26.7 C
HANDLING (PERSONNEL):: Avoid prolonged or repeated contact with skin. Wash hands thoroughly after handling.
HANDLING (PHYSICAL ASPECTS):: Agitate containers before use. Keep from freezing. Keep out of reach of children.
STORAGE PRECAUTIONS:: Avoid extreme temperatures. Keep container closed when not in use. Store in a cool dry place.

VIII. EXPOSURE CONTROLS / PERSONAL PROTECTION

EYE / FACE PROTECTION REQUIREMENTS:: Wear safety glasses. A respiratory protection program that meets OSHA's 29 CFR 1910-134 and ANSI Z88-2 requirements must be followed whenever workplace conditions warrant a respirator's use.
SKIN PROTECTION REQUIREMENTS:: Selection of specific items such as gloves, boots, apron or full-body suit will depend on operation. Wash hands thoroughly after handling.
RESPIRATORY PROTECTION REQUIREMENTS:: Use NIOSH approved vapor canister or supplied-air respiratory protection in confined spaces that are not ventilated. Use adequate ventilation to keep concentration of vapors below exposure limits.
EXPOSURE GUIDELINES:: No Information Available.

IX. PHYSICAL AND CHEMICAL PROPERTIES

FORM	Liquid
COLOR	White
ODOR	Strong Solvent Odor
BOILING POINT	246 - 288 F
EVAPORATION RATE	Slower than Ether
% VOLATILE VOLUME	69.1%
VAPOR DENSITY	Heavier than Air
DENSITY	7.2 lbs.

X. STABILITY AND REACTIVITY

STABILITY:: Stable. May decompose when heated.
POLYMERIZATION:: Polymerization may occur when product is heated.
DECOMPOSITION:: Decomposition will not occur if handled and stored properly.

XI. TOXICOLOGICAL INFORMATION

No information available.

XII. ECOLOGICAL INFORMATION