MSDS – EnergyMax® Acrylic Coating
MATERIAL SAFETY DATA SHEET
I. CHEMICAL PRODUCT AND COMPANY INFORMATION
- PRODUCT IDENTIFICATION
- EnergyMax Acrylic Elastomeric Roof Coating
- Packaging: buckets, drums, totes
- Chemical Name: Acrylic Elastomeric Roof Coating
- CAS Number: Blend
- COMPANY IDENTIFICATION
- Lexis Coatings
- 1025 Rose Creek Dr
- Ste 620 #138
- Woodstock, GA 30189
- 770-675-3344
- DATE
- 05/16/11
- FOR EMERGENCIES
- 1-877-454-0052
II. HAZARDS IDENTIFICATION
- CAUTION
- Prolonged or repeated contact may cause skin or eye irritation. May be harmful if swallowed. Protect from freezing.
- HMIS Rating
- Health: 1
Flammability: 0
Reactivity: 0
Personal Protection Index: X - EYE:
- Contact may cause eye irritation.
- SKIN:
- Can cause moderate skin irritation.
III. COMPOSITION AND INFORMATION ON INGREDIENTS
- COMPONENT LISTING:
-
Chemical Name Amount CAS Number WATER < 35% Min 7732-18-5 TITANIUM DIOXIDE < 20% Max 13463-67-7 ZINC OXIDE < 5% Max 1314-13-2 AMMONIA < 1% Max 1336-21-6 - (See Section 8 for exposure guidelines.)
- (See Section 15 for regulatory information.)
IV. FIRST AID MEASURES
- EYE CONTACT
- After initial flusing, remove any contact lenses and continue flushing for at least 15 minutes. Get medical attention if irritation develops or persists.
- SKIN CONTACT
- Remove contaminated clothing and shoes. Wash affected area immediately with large amounts of soap and water. Get medical attention if irritation develops or persists.
- INHALATION
- If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if cough or other symptoms develop.
- INGESTION
- Get immediate medical attention. Never give anything by mouth to an unconscious person.
V. FIRE FIGHTING MEASURES
- FLAMMABLE PROPERTIES
- TCC Flash Point: 120.0 C (248.0 F)
- Auto Ignition Temperature: N/A
- FLAMMABLE LIMITS IN AIR
- LEL: N/A
- UEL: N/A
- EXTINGUISHING MEDIA
- Water, carbon dioxide, foam or dry powder.
- FIRE FIGHTING INSTRUCTIONS
- As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full protective gear.
VI. ACCIDENTAL RELEASE MEASURES
- SAFEGUARDS (PERSONNEL):
- Wear safety goggles. Wear appropriate protective equipment.
- INITIAL CONTAINMENT:
- Contain spilled material. Absorb spills with inert or absorbent material.
- LARGE SPILLS PROCEDURE:
- Ventilate enclosed areas or wear self-contained breathing appratus. Recover free liquid in closed containers. Keep out of sewers and water courses. Clean area with absorbent material.
VII. HANDLING AND STORAGE
- RECOMMENDED STORAGE TEMPERATURE:
- Minimum: 15.6 C (60.1 F)
Maximum: 26.7 C (80.1 F) - SHELF LIFE (in original, sealed containers):
- 8 months @ 26.7 C
- HANDLING (PERSONNEL):
- Avoid prolonged or repeated contact with skin. Wash hands thoroughly after handling.
- HANDLING (PHYSICAL ASPECTS):
- Agitate containers before use. Keep from freezing. Keep out of reach of children.
- STORAGE PRECAUTIONS:
- Avoid extreme temperatures. Keep container closed when not in use. Store in a cool dry place.
VIII. EXPOSURE CONTROLS / PERSONAL PROTECTION
- EYE / FACE PROTECTION REQUIREMENTS:
- Wear safety glasses. A respiratory protection program that meets OSHA’s 29 CFR 1910-134 and ANSI Z88-2 requirements must be followed whenever workplace conditions warrant a respirator’s use.
- SKIN PROTECTION REQUIREMENTS:
- Selection of specific items such as gloves, boots, apron or full-body suit will depend on operation. Wash hands thoroughly after handling.
- RESPIRATORY PROTECTION REQUIREMENTS:
- Use NIOSH approved vapor canister or supplied-air respiratory protection in confined spaces that are not ventilated. Use adequate ventilation to keep concentration of vapors below exposure limits.
- EXPOSURE GUIDELINES:
- ETHYLENE GLYCOL
OSHA Ceiling Limit: 50 ppm, 125 mg/m3
IX. PHYSICAL AND CHEMICAL PROPERTIES
| FORM | Liquid |
| COLOR | White or any custom color |
| ODOR | Faint Odor |
| BOILING POINT | 212 F |
| SOLUBILITY IN WATER | Dispersible |
| DENSITY (Pounds per Gallon) | 12.0 – 12.4 |
| MELTING / FREEZING POINT | 32 F |
| % VOLATILE BY VOLUME | 48 – 52% |
| VISCOSITY | 9000 – 13000 cps |
| VOLATILE ORGANIC CONTENT | <50 g/lit |
X. STABILITY AND REACTIVITY
- STABILITY:
- Stable.
- POLYMERIZATION:
- Product will not undergo polymerization.
- DECOMPOSITION:
- Decomposition will not occur if handled and stored properly.
XI. TOXICOLOGICAL INFORMATION
No information available.
XII. ECOLOGICAL INFORMATION
No information available.
XIII. DISPOSAL CONSIDERATIONS
- WASTE DISPOSAL:
- Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.
XIV. TRANSPORTATION INFORMATION
- PRODUCT LABEL: EnergyMax® Acrylic Elastomeric Roof Coating
- D.O.T. SHIPPING NAME: N/A
- D.O.T. HAZARD CLASS: Non-Hazardous
XV. REGULATORY INFORMATION
No information available.
XVI. OTHER INFORMATION
The information contained in this MSDS is accurate to the best of our knowledge. It is intended to assist the user in his evaluation of the product’s hazards, and safety precautions to be taken in its use. We do not assume liability for the use of, or reliance on this information, nor do we guarantee its accuracy or completeness.