MSDS – PrimeLock® Epoxy Primer Part B

MATERIAL SAFETY DATA SHEET

I. CHEMICAL PRODUCT AND COMPANY INFORMATION

PRODUCT IDENTIFICATION
PrimeLock® Epoxy Primer
Packaging: buckets, drums, totes
Chemical Name: Epoxy Primer
CAS Number: Blend
COMPANY IDENTIFICATION
Lexis Coatings
1025 Rose Creek Dr
Ste 620 #138
Woodstock, GA 30189
770-755-1820
DATE
05-31-2011
FOR EMERGENCIES
1-800-424-9300

II. HAZARDS IDENTIFICATION

CAUTION
Prolonged or repeated contact may cause skin or eye irritation. May be harmful if swallowed. Protect from freezing.
HMIS Rating
Health: 1
Flammability: 1
Reactivity: 0
Personal Protection Index: B
EYE:
Contact may cause: corrosion to the eyes – corneal burns – permanent eye injury.
SKIN:
Can cause moderate skin irritation.
INGESTION:
May be harmful if swallowed. Material can cause the following: severe irritation of the mouth, throat and digestive tract.

III. COMPOSITION AND INFORMATION ON INGREDIENTS

COMPONENT LISTING:
Chemical Name Amount CAS Number
XYLENE 4.7 % 1330-20-7
(See Section 8 for exposure guidelines.)
(See Section 15 for regulatory information.)

IV. FIRST AID MEASURES

EYE CONTACT
After initial flusing, remove any contact lenses and continue flushing for at least 15 minutes. Get medical attention if irritation develops or persists.
SKIN CONTACT
Remove contaminated clothing and shoes. Wash affected area immediately with large amounts of soap and water. Get medical attention if irritation develops or persists.
INHALATION
If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if cough or other symptoms develop.
INGESTION
DO NOT induce vomiting. Drink 1 to 2 glasses of water. Get immediate medical attention. Never give anything by mouth to an unconscious person.

V. FIRE FIGHTING MEASURES

FLAMMABLE PROPERTIES
TCC Flash Point: Noncombustible
Auto Ignition Temperature: N/A
FLAMMABLE LIMITS IN AIR
LEL: N/A
UEL: N/A
EXTINGUISHING MEDIA
Water, carbon dioxide, foam or dry powder.
FIRE FIGHTING INSTRUCTIONS
As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full protective gear.

VI. ACCIDENTAL RELEASE MEASURES

SAFEGUARDS (PERSONNEL):
Wear safety goggles. Wear appropriate protective equipment.
INITIAL CONTAINMENT:
Contain spilled material. Absorb spills with inert or absorbent material.
LARGE SPILLS PROCEDURE:
Ventilate enclosed areas or wear self-contained breathing appratus. Recover free liquid in closed containers. Keep out of sewers and water courses. Clean area with absorbent material.

VII. HANDLING AND STORAGE

RECOMMENDED STORAGE TEMPERATURE:
Minimum: 15.6 C (60.1 F)
Maximum: 26.7 C (80.1 F)
SHELF LIFE (in original, sealed containers):
8 months @ 26.7 C
HANDLING (PERSONNEL):
Avoid prolonged or repeated contact with skin. Wash hands thoroughly after handling.
HANDLING (PHYSICAL ASPECTS):
Agitate containers before use. Keep from freezing. Keep out of reach of children.
STORAGE PRECAUTIONS:
Avoid extreme temperatures. Keep container closed when not in use. Store in a cool dry place.

VIII. EXPOSURE CONTROLS / PERSONAL PROTECTION

EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses. A respiratory protection program that meets OSHA's 29 CFR 1910-134 and ANSI Z88-2 requirements must be followed whenever workplace conditions warrant a respirator's use.
SKIN PROTECTION REQUIREMENTS:
Selection of specific items such as gloves, boots, apron or full-body suit will depend on operation. Wash hands thoroughly after handling.
RESPIRATORY PROTECTION REQUIREMENTS:
Use NIOSH approved vapor canister or supplied-air respiratory protection in confined spaces that are not ventilated. Use adequate ventilation to keep concentration of vapors below exposure limits.
EXPOSURE GUIDELINES:
ETHYLENE GLYCOL
OSHA Ceiling Limit: 50 ppm, 125 mg/m3

IX. PHYSICAL AND CHEMICAL PROPERTIES

FORM Liquid Clear
COLOR Beige
ODOR Faint Odor
BOILING POINT 212 F
VAPOR PRESSURE (mm Hg @ 20C/68F) Xylene: 6.0
PERCENT VOLATILE BY VOLUME 69.4%
EVAPORATION RATE (Ether=1) : Slower
VOC 105 Grams/Liter (A&B Combined)
RELATIVE VAPOR DENSITY (Air=1) : Lighter

X. STABILITY AND REACTIVITY

STABILITY:
Stable.
POLYMERIZATION:
Product will not undergo polymerization.
DECOMPOSITION:
Decomposition will not occur if handled and stored properly.

XI. TOXICOLOGICAL INFORMATION

No information available.

XII. ECOLOGICAL INFORMATION

No information available.

XIII. DISPOSAL CONSIDERATIONS

WASTE DISPOSAL:
Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.

XIV. TRANSPORTATION INFORMATION

PRODUCT LABEL: PrimeLock® Epoxy Primer
D.O.T. SHIPPING NAME: N/A
D.O.T. HAZARD CLASS: Non-Hazardous

XV. REGULATORY INFORMATION

No information available.

XVI. OTHER INFORMATION

The information contained in this MSDS is accurate to the best of our knowledge. It is intended to assist the user in his evaluation of the product's hazards, and safety precautions to be taken in its use. We do not assume liability for the use of, or reliance on this information, nor do we guarantee its accuracy or completeness.