Neoprene Rust Protection Primer

Membrane Roofing / Fluid Applied Roofing / Neoprene Primer – 07 56 00

1. Product Name PrimeLock™ Neoprene Primer 2. Manufacturer Lexis Coatings 1025 Rose Creek Dr Ste 620 #138 Woodstock, GA 30189 Phone: 770-755-1820 Fax: 206-888-2438 URL: www.lexiscoatings.com 3. Product Description PrimeLock™ Neoprene Primer is a solvent based, rust protection primer designed to encapsulate existing rust and improve adhesion of all Lexis roof coatings. It contains rust inhibitors and mildewcides. Basic Uses Built Up Roofing (BUR), Concrete Roofs, Metal Roofs, Modified Bitumen, Polyurethane Foam, Single Ply Roofing (PVC, TPO). Advantages Fast curing, solvent based rust protection primer. Contains rust inhibitors and locks up rust. Penetrates into porous surfaces and provides excellent anchorage. Black primer raises surface temperature before the application of sprayed polyurethane foam.
	4. Technical Data See table on the following page. 5. Installation All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. PrimeLock™ Neoprene Primer is ready to use. Thinning is not recommended. Containers should not be left open for extended periods of time. Follow our roof repair and roof restoration procedures and always perform a coating adhesion test before doing the entire roof. Spray: 3,000 psi, 0.17 tip. Brush: Good quality, stiff synthetic bristle brush. Clean Up: Xylene.	6. Availability & Cost PrimeLock™ Neoprene Primer is available directly from Lexis Coatings and from authorized distributors. Contact Lexis Coatings for referral to a local Sales Representative or visit our website. Pricing information can be obtained from Lexis Sales Representatives. 7. Warranty This product is designed to be topcoated with our elastomeric coatings. A warranty is provided on the entire roof restoration system when installed by an authorized contractor. 8. Maintenance Periodic maintenance of Lexis Roof Restoration System ensures extended service life and maintains reflectivity. 9. Technical Services Contact Lexis Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available. 10. Filing Services Additional product information is available from Lexis Coatings.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.

PrimeLock™ Neoprene Primer Technical Data

Freight Classification: Paint – Flammable Liquid (UN 1263 Red Label Required)

Warning: PrimeLock™ Neoprene Primer is a solvent-based and contains Toluene. Keep away from open flame, heat or sparks. Use only in ventilated areas and provide mechanical ventilation in enclosed spaces. Avoid breathing vapor or mist. Approved (MESA/NIOSH) chemical respirator and protective clothing must be used at all times. Fresh air hose masks required for interior applications. Lexis Coatings must be completely dry before exposing to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, do not induce vomiting. Call Physician immediately.

Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer’s sole responsibilty shall be to replace that portion of any product that proved to be defective.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.