Aromatic Polyurethane Elastomeric Coating

Membrane Roofing / Fluid Applied Roofing / Elastomeric Roof Coating – 07 56 00

1. Product Name EnergyGuard® Aromatic Polyurethane Roof Coating 2. Manufacturer Lexis Coatings 1025 Rose Creek Dr Ste 620 #138 Woodstock, GA 30189 Phone: 770-755-1820 Fax: 206-888-2438 URL: www.lexiscoatings.com 3. Product Description EnergyGuard® Aromatic Polyurethane Elastomeric Roof Coating is a single component, moisture cure polyurethane roof coating for all types of roofs. Basic Uses Built Up Roofing (BUR), Concrete Roofs, Metal Roofs, Modified Bitumen, Polyurethane Foam, Single Ply Roofing (PVC, TPO). Advantages Provides a seamless, durable membrane. High Tensile Strength and Elongation properties. Superior adhesion to various substrates. Contains fungicides and mildewcides. Excellent UV protection for polyurethane foam. Heat reflective coating helps reduce cooling costs. Reflects the sun’s UV-rays and prevents premature degradation. Prevents premature roof failure by controlling thermal cycling.
	4. Technical Data See table on the following page. 5. Installation All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. EnergyGuard® Aromatic Polyurethane Roof Coating is ready to use. Thinning is not recommended. Containers should not be left open for extended periods of time. Follow our roof repair and roof restoration procedures and always perform a coating adhesion test before doing the entire roof. Spray: Airless Sprayer, 1gpm, 3,000 psi, .025 or .031 tip. Brush: Good quality synthetic bristle brush. Roller: Long nap roller. Clean Up: Xylene.	6. Availability & Cost EnergyGuard® Aromatic Polyurethane Roof Coating is available directly from Lexis Coatings and from authorized distributors. Contact Lexis Coatings for referral to a local Sales Representative or visit our website. Pricing information can be obtained from Lexis Sales Representatives. 7. Warranty On preapproved, qualified applications, using Lexis approved applicators, a 10 year warranty is available. Contact Lexis Coatings for complete warranty information. 8. Maintenance Periodic maintenance of Lexis Roof Restoration System ensures extended service life and maintains reflectivity. 9. Technical Services Contact Lexis Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available. 10. Filing Services Additional product information is available from Lexis Coatings.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.

EnergyGuard® Aromatic Polyurethane Roof Coating Technical Data

Freight Classification: Paint – Flammable Liquid (UN 1263 Red Label Required)

Warning: EnergyGuard® Aromatic Polyurethane Roof Coating contains Xylene, VM & P Naptha. Keep away from open flame, heat or sparks. Use only in ventilated areas and provide mechanical ventilation in enclosed spaces. Avoid breathing vapor or mist. Approved (MESA/NIOSH) chemical respirator and protective clothing must be used at all times. Fresh air hose masks required for interior applications. Lexis Coatings must be completely dry before exposing to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.

Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer’s sole responsibilty shall be to replace that portion of any product that proved to be defective.

This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.