Share |

Silicone Elastomeric Roof Coating

Membrane Roofing / Fluid Applied Roofing / Elastomeric Roof Coating – 07 56 00

1. Product Name

EnergyGuard® Silicone Elastomeric Roof Coating

2. Manufacturer
  • Lexis Coatings
  • 1025 Rose Creek Dr
  • Ste 620 #138
  • Woodstock, GA 30189
  • Phone: 770-755-1820
  • Fax: 206-888-2438
  • URL: www.lexiscoatings.com
3. Product Description

EnergyGuard® Silicone Elastomeric Roof Coating is a solvent based, waterproof, silicone rubber roof coating for all types of roofs.

Basic Uses

Sprayed Polyurethane Foam.

Advantages
  • Provides a seamless, durable membrane.
  • Exceptional weathering characteristics. Resists ozone and harsh chemicals.
  • Maintains flexibility even in extreme temperature ranges.
  • Breathable membrane prevents moisture entrapment.
  • Heat reflective coating helps reduce cooling costs.
  • Reflects the sun’s UV-rays and prevents premature degradation.
  • Prevents premature roof failure by controlling thermal cycling.
  • Energy Star-labeled roof coating.

silicone elastomeric roof coating

4. Technical Data

See table on the following page.

5. Installation
  • All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
  • Any existing coating must be checked for good adhesion.
  • Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
  • EnergyGuard® Silicone Elastomeric Roof Coating is ready to use. Thinning is not recommended.
  • Containers should not be left open for extended periods of time.
  • Follow our roof repair and roof restoration procedures and always perform a coating adhesion test before doing the entire roof.
  • Spray: Airless Sprayer, 1gpm, 3,000 psi, .025 or .031 tip.
  • Brush: Good quality synthetic bristle brush.
  • Roller: Long nap roller.
6. Availability & Cost

EnergyGuard® Silicone Elastomeric Roof Coating is available directly from Lexis Coatings only. Contact Lexis Coatings for pricing information.

7. Warranty

On preapproved, qualified applications, using Lexis approved applicators, a 10 year warranty is available. Contact Lexis Coatings for complete warranty information.

8. Maintenance

Periodic maintenance of Lexis Roof Restoration System ensures extended service life and maintains reflectivity.

9. Technical Services

Contact Lexis Coatings for Technical Support. Additional information, product literature, brochures, and specifications are available.

10. Filing Services

Additional product information is available from Lexis Coatings.

CSI This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.


EnergyGuard® Silicone Elastomeric Roof Coating Technical Data

Property Value Test Method
Color White or any custom color  
Solids by weight 80% ± 2% ASTM D-1644
Solids by volume 69% ± 2% ASTM D-2697
Hardness 50 ± 5 Shore A
Tensile Strength 486 psi ± 20 @ 73°F
700 psi ± 20 @ 0°F
ASTM D-412
Permeability 5.9 perms ASTM E-96
Elongation 267% @ 73°F
282% @ 0°F
ASTM D-412
Reflectivity Initial: 84%, After 3 years: 70% (White) ASTM C-1549
Emissivity 0.85 ASTM C-1371
SRI 105  
Coverage 1.5 – 2.0 gal/100 s.f. per coat. 2 coats recommended.  
Application Temperature 45°F (and rising) – 95°F, Less than 85% relative humidity.  
Flash Point >105°F  
Dry Time Dry to touch in 1 – 2 hours, 4 – 6 hours to recoat.  
Shelf Life Unopened Containers – 12 months @ 40°-90°F  
Clean Up MEK, Naptha or Mineral Spirits  
VOC < 250 g/lit ASTM D-3960
EPA Method 24

Warning: EnergyGuard® Silicone Elastomeric Roof Coating contains Petroleum Solvent. Keep away from open flame, heat or sparks. Use only in ventilated areas and provide mechanical ventilation in enclosed spaces. Avoid breathing vapor or mist. Approved (MESA/NIOSH) chemical respirator and protective clothing must be used at all times. Fresh air hose masks required for interior applications. Lexis Coatings must be completely dry before exposing to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.

Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer’s sole responsibilty shall be to replace that portion of any product that proved to be defective.

CSI This product data sheet conforms to the editorial style prescribed by The Construction Specifications Institute.
The manufacturer is responsible for technical accuracy.

Your Roof Reborn®